|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
;
This is the correct service manual of SHARP RX-100H(BK) DAT.
SERVICE OSD
SETUP SETUP
MODEL NVRAM INITIAL ELAPSED TIME MICOM VERSION VCHIP TEST WB
L172WA L OFF 21 H Ver. 49 OFF 0
MODEL NVRAM INITIAL ELAPSED TIME MICOM VERSION VCHIP TEST WB
L172WA L OFF 21 H Ver. 49 OFF 0
UP / DOWN
SELECT
UP / DOWN
SELECT
1. Press the MENU key and then enter 3-0-2-0 with the Direct Channel Select button on the remote control (See the remote control figure on page 8) to access the Service menu.
SETUP
2. MODEL shows the factory model name of the monitor. You don't need to make any adjustment in this menu.
SETUP
MODEL NVRAM INITIA L ELAPSED TIME MICOM VERSION VCHIP TEST WB
L172WAL OFF 21 H Ver. 49 OFF 0
MODEL NVRAM INITIA L ELAPSED TIME MICOM VERSION VCHIP TEST WB
L172WAL OFF 21 H Ver. 49 OFF 0
UP / DOWN
SELECT
UP / DOWN
SELECT
3. Select "OFF" in the NVRAM INITIAL using the left/right key to return to the factory defaults.
SETUP
4. Shows the monitor usage time. You don't need to make any adjustment in this menu.
SETUP
MODEL NVRAM INITIA L ELAPSED TIME MICOM VERSION VCHIP TEST WB
L172WAL OFF 21 H Ver. 49 OFF 0
MODEL NVRAM INITIA L ELAPSED TIME MICOM VERSION VCHIP TEST WB
L172WAL OFF 21 H Ver. 49 OFF 0
UP / DOWN
SELECT
UP / DOWN
SELECT
5. Shows the Micom version. You don't need to make any adjustment in this menu.
6. Use this menu to test the Vchip. When you select "OFF" using the left/right key, blocking will be initiated depending on the rating signal.
- 14 -
|
|
|
> |
|
